CAD Professional Microphones

CAD Percussion Microphone

CAD ICM417

Packaged in a rugged small, all metal body, the ICM417 electret condenser microphone provides natural, transparent sound quality. The transformerless design of this cardioid condenser provides optimum low frequency response and low distortion. Designed for use with cymbals, overheads, and stringed instruments, the wide, flat frequency of the ICM417, coupled with the CAD exclusive I.N.R.™ shockmount, make this an extremely high quality percussion microphone, as well.

List Price $149.00

But It Now for 119.00!*

Specifications
Generating Element: Electret condenser (Phantom Powered)
Polar Pattern: Unidirectional (Cardioid)
Frequency Response: 40 Hz - 20 kHz
Output Level: Power Level: -37 dB (0 dB = 1 mW per 10 microbars)
Open Circuit Voltage: -57 dB (0 dB = 1 volt per microbar) 14 mV/Pascal
Impedance: Low (250 ohms nominal)
Dynamic Range: 104 dB
Equivalent Noise Level: Less than 26 dB, A weighted
Maximum SPL: 130 dB (1% THD, open circuit)
Supply Voltage: 9 - 52 Vdc, positive pins 2 & 3 reverse polarity protected
Current Required: Less than 5 mA over operating voltage range Phasing: Positive pressure on diaphragm generates a positive voltage on pin 2 relative to pin 3
Shock Mounting System: I.N.R.™ (Impact Noise Rejection - proprietary rubber compound)

Adirondack Guitar Drum and Percussion Menu

Email

Ordering, Shipping and Return Policies

Why Buy from Adirondack Guitar?

Adirondack Guitar Home

* UPS Ground or USPS Lower 48 States only. Outside of the Continental US, call or Email for prices.